Mac 101 Cld

The MAC 101 CLD uses pure cold LEDs for applications where only higher color temperatures are required and is intensity controllable.

The ultra-compact MAC 101 LED moving head wash is available in three white light versions that expand its use to applications where high quality, pure white light is needed. Ideal for highlighting skin tones, textiles, or set pieces, the MAC 101 variants incorporate cold and/or warm LEDs instead of RGB for a better white light quality and greater output.

Note: PowerCon Cable is not included

Features:

High quality LED white light
Ideal for highlighting skin tones, textiles or set pieces
Tight and punchy beam effects, long throw
Multiple field angle options for a perfect wash
Incredibly fast and precise movement
Less than 125 watt total power requirement
Ultra-compact, low weight design (3.7 kg)
Power and data daisy-chain

Specifications:

Physical:
Length: 241 mm (9.5 in.) across yoke
Width: 241 mm (9.5 in.) across yoke
Height: 304 mm (12.0 in.)
Weight: 3.7 kg (8.2 lbs.)
Dynamic Effects:
Shutter effect: Electronic, with pulse and random effects
Electronic dimming: 0 – 100%, four dimming curve options
Pan: 540°
Tilt: 240°
Pan and tilt speed: Adjustable via onboard control panel and DMX
Control and Programming:
Control: DMX
RDM: Implemented
Control resolution: 8-bit, with 16-bit control of pan & tilt
DMX channels: 7
Setting and addressing: Control panel with backlit graphic display
Protocol: USITT DMX512-A, ANSI/ESTA E1.20 RDM
Transceiver: RS-485
Fixture software update: Via DMX with Martin™ USB Duo DMX Interface Box
Optics:
Light source: Cree XP-E high power emitters
Color temperature: 6700 K
Minimum LED lifetime: 50 000 hours (to >70% luminous output)*
LED refresh rate: 1220 Hz
*Figure obtained under manufacturer´s test conditions
Construction:
Color: Black
Housing: High-impact flame-retardant thermoplastic
Protection rating: IP20
Installation:
Mounting points: One M12 threaded hole for rigging clamp
Location: Indoor use only, must be fastened to surface or structure
Orientation: Any
Minimum distance to combustible materials: 100 mm (3.9 in.) from head, no minimum distance from base
Minimum distance to illuminated surfaces: 200 mm (7.9 in.)
Connections:
AC power input: Neutrik PowerCon
AC power throughput: Neutrik PowerCon
DMX data in/out: 5-pin locking XLR
Electrical:
AC power: 100-240 V nominal, 50/60 Hz
Maximum total power consumption: 123 W
Power supply unit: Auto-ranging electronic switch mode
Main fuse: 5 AT (slow blow)
Typical power consumption, all effects static, zero light output: <25 W
Typical Power and Current:
100 V, 50 Hz: 122 W, 1.3 A, PF 0.991
120 V, 60 Hz: 121 W, 1.1 A, PF 0.987
208 V, 60 Hz: 123 W, 0.7 A, PF 0.938
230 V, 50 Hz: 123 W, 0.6 A, PF 0.915
240 V, 50 Hz: 123 W, 0.6 A, PF 0.900
PF = power factor
Measurements made at nominal voltage with all LEDs at full intensity. Allow for a deviation of +/- 10%.
Thermal:
Cooling: Forced air (temperature-regulated, low noise, user-definable levels)
Maximum ambient temperature (Ta max.): 40° C (104° F)
Minimum ambient temperature (Ta min.): 5° C (41° F)
Total heat dissipation (calculated, +/- 10%): 420 BTU/hr.
Approvals:
EU safety: EN 60598-2-17, EN 62471
EU EMC: EN 55103-1, EN 55103-2, EN 55015, EN 61547
US safety: UL 1573
US EMC: FCC Part 15 Class A
Canadian safety: CSA E598-2-17
Canadian EMC: ICES-003 Class A
Australia/NZ: C-TICK N4241
Included Items:
M12 bolt suitable for use with Martin rigging clamps
User manual

Photometric Data:

Standard (All LEDs on):
Efficacy: 54.3 lumens per watt
One-tenth peak angle: 13.5°
Total output: 5900 lm
Standard (All LEDs on, Narrow diffuser):
Efficacy: 50.8 lumens per watt
One-tenth peak angle: 17°
Total output: 5500 lm
Standard (All LEDs on, Medium diffuser):
Efficacy: 41.6 lumens per watt
One-tenth peak angle: 52°
Total output: 4500 lm